Description:

Sensor inductive, M32x1.5 91long, non-flush, Sn: 13,-25-230°C, connection to amplifier, lemo connector, IP50, VA

Description:

sensor magnetic, cylinder, 6.2mm T-groove, 6,3x30x6,2mm,

10-30V DC, 1x PNP NO, Cable connector M8 3pin 0.3m PUR

(Polyurethane), IP67, Zinc die-cast, LED, 2.5mT, mounting

Lateral, Short travel path, Sensor surface position Center of

the device

Description:

Amplifier capacitive, high temperature, 30x47x75mm, 18-36V

DC, cable tail 2m PUR (polyurethane), IP65, polyamide, LED

Description:

Sensor inductive, M32x1.5 83.5long, non-flush, Sn: 13,

0-230°C, connection to amplifier, lemo connector, IP67, stainl Steel

Description:

Connection cable, 30m, Female (socket) 2pin Straight, Free conductor end, 2×0.25mm², Polytetrafluorethylene (PTFE), Shielded

Description:

Sensor Magnetic, cylinder, 3.75mm round groove, Ø3.6mm 20long, 10-30V DC, 1x PNP NO, M8 cable connector 3-pin 0.3m PUR (polyurethane), IP67, stainl. steel, LED, 2.8mT, lateral installation, position of sensor surface at the edge of the device

Description:

Encoder, programmable, Ø58mm 45long, hollow shaft 12mm, 65536 pulses, 5-30V DC, M12 connector 8-pin, IP65,

aluminum

Description:

sensor inductive, M18x1 70long, Flush, Sn: 5, 10-35V DC,-25-180°C, PNP NC, Cable 5m Polytetrafluoreth  (PTFE), IP50, Stainless steel 1.4305, ATEX

Description:

sensor inductive, M18x1 70long, Flush, Sn: 5, 10-35V DC,-25-180°C, PNP NO, Cable 5m Polytetrafluorethylene

(PTFE), IP50, Stainless steel 1.4305, ATEX

Description:

Sensor inductive, M32x1.5 91long, non-flush, Sn: 13,-25-230°C, connection to amplifier, lemo connector, IP50, VA

Description:

Connection cable, 15m, Lemo Female (socket) 2pin Straight,

Free conductor end, 2×0.34mm², Polytetrafluorethylene

(PTFE), -40-250°C, Shielded

Description:

Sensor inductive, M32x1.5 91long, non-flush, Sn: 13,-25-230°C, connection to amplifier, lemo connector, IP50, VA

Description:

Sensor inductive, M12x1 60long, non-flush, Sn: 6, 10-30V

DC, PNP NO, M8 plug connector 3-pin, IP67, nickel-plated (npltd) brass

Description:

sensor inductive, M18x1 72long, Flush, Sn: 5, 10-30V DC,

PNP NO, Connector M12 3pin, IP67, Brass Nickel-plated

Description: sensor inductive, M32x1.5 91long, non-flush, Sn: 13,-25-230°C, connection to amplifier, lemo connector, IP50, VA

Description: Amplifier inductive, high temperature, 75x99x22mm, 10-35VDC, PNP NO, terminal, IP20, plastic, LED

Description: Connection cable, 15m, Lemo Female (socket) 2pin Straight, Free conductor end, 2×0.34mm², Polytetrafluorethylene (PTFE), -40-250°C, Shielded